The PHEV manual (pages 232–234) says there are two fuse boxes: one under the bonnet, and one behind the lower left instrument panel protector (the driver's footwell trim). Before touching either, it says to put the vehicle in power-off, then open the boot, fold back the carpet, take out the storage box and disconnect the 12 V negative cable.
The fuse layout diagram is printed inside the fuse box cover. For a hardwired dashcam, use a fuse tap on a circuit that is switched with ignition (and a separate always-on one if you want parking mode), and use the correct rating. If you aren't comfortable with that, a dashcam installer will do it cheaply, and it avoids problems with the car's electronics.